Promise Technology SMARTSTOR NS4300N - Manual (Page 45)

Chapter 3: Connecting to the SmartStor
35
Setting up a Network Drive on a Macintosh PC
Before you can access the SmartStor from a Macintosh (Mac OS X) PC, you
must configure the SmartStor to communicate with the MacOS.
In PASM
1. Start PASM.
See “PASM in your Browser” on page 21, “PASM in SmartNAVI” on
page 22, or “PASM in Bonjour” on page 24.
2. Click the Protocol Control icon, then click the Macintosh tab.
3. Click the Enable button.
4. Optional. Type a message in the Login Message field.
5. Click the OK button to save your settings.
The optional login message appears on the Welcome screen when you log
into SmartStor from a Macintosh PC.
Login Message