Promise Technology SMARTSTOR NS4300N - Manual (Page 188)

SmartStor NS4300N Product Manual
178
Figure 8. SmartStor front and back views
2. Disconnect the power cable from the SmartStor.
3. Wait 10 seconds, then reconnect the power cable.
4. Press the power button.
It takes about a minute to boot the SmartStor. When fully booted:
• The System Status LED turns green.
• The buzzer beeps one time.
5. Verify that the SmartStor now appears in SmartNAVI MSN window.
See Figure 7.
System Status LED
Power Button
Power Connection