Promise Technology SMARTSTOR NS4300N - Manual (Page 63)

Chapter 3: Connecting to the SmartStor
53
After a few moments, the plug-in is added.
7. Click the Configure Plugin button.
The newly added plug-in appears in the list. Its Service Status is OFF.
8. Click the plug-in to choose it.
The plug-in’s name turns red.
9. Click the Enable button.
After a moment, the Service Status changes to ON.
The Firefly plug-in is now installed SmartStor.
Warning
Do not disconnect the power or shut down the SmartStor while the
plug-in installation is running!