Pioneer PureVision PDP 5040HD - Manual (Page 37)

08 Basic Operations
English
37
En
1 Press SPLIT to select the display mode.
• Each time you press SPLIT, the display mode is
switched among 2-screen, picture-in-picture,
and single-screen.
2 When in the 2-screen or picture-in-picture mode,
press
/ to select a screen to be active.
• “ z z z z z” appears on the active screen, which
outputs sound.
3 To select the desired input source, press the
appropriate input source button.
• If watching TV programs, press CH +/– to
change the channel.
• The multiscreen function cannot display images from
the same input source at the same time. If you make
such an attempt, a warning message appears.
• When you press HOME MENU, DTV GUIDE, or
DTV INFO, the single-screen mode is restored and
the corresponding menu is displayed.
Freezing images
Use the following procedure to capture and freeze one
frame from a moving image that you are watching.
1 Press FREEZE.
• A still image appears on the right screen while a
moving image is shown on the left screen.
2 Press FREEZE again to cancel the function.
• With the screen split, any image cannot be frozen.
• When this function is not available, a warning mes-
sage appears.
PDP5040HD-Eng (28-37) 7/24/03, 1:58 PM 37