Pioneer PureVision PDP 5040HD - Manual (Page 45)

09 Basic Adjustment Settings
English
45
En
Setting for skipping unwanted channels
From among digital TV channels searched and set up
using Auto Channel Preset, you can select channels to
be skipped when CH +/– are operated.
1 Press HOME MENU.
2 Press / to select “DTV Setup”, and then press
ENTER.
3 Press / to select “DTV Channel Setup”, and
then press ENTER.
4 Press / to select “Channel Add/Del”, and then
press ENTER.
5 Press / to select “Channel”.
6 Press / to select a channel to be skipped.
7 Press / to select “Add/Delete”.
8 Press / to select “Delete”.
9 Press HOME MENU to exit the menu.
• To restore skipped channels, use the above procedure
except that you select “Add” in step 8.
Checking signal strength
When watching a digital TV program, you can check its
current signal strength.
1 Press HOME MENU.
2 Press / to select “DTV Setup”, and then press
ENTER.
3 Press / to select “DTV Channel Setup”, and
then press ENTER.
4 Press / to select “Signal Strength”, and then
press ENTER.
• Adjust the direction of the antenna so that the
current signal strength reaches as close to the
maximum signal strength as possible.
5 Press HOME MENU to exit the menu.
PDP5040HD-Eng (40-55) 7/24/03, 1:59 PM 45