Pioneer PureVision PDP 5040HD - Manual (Page 91)

12 Useful Adjustment Settings
English
91
En
Setting the voluntary moving rating sys-
tem (MPAA)
1
Press HOME MENU.
2 Press / to select “Setup”, and then press
ENTER.
3 Press / to select “Parental Control”, and then
press ENTER.
• If you have set a password (page 95), the
password entry screen appears. Enter your 4-
digit password using buttons 0 – 9.
4 Press / to select “MPAA Ratings”, and then
press ENTER.
5 Press / to select the desired rating, and then
press / to select “View” or “Block”.
• The factory defaults for all the ratings are
“View”.
6 Press HOME MENU to exit the menu.
Example 1:
Changing “R” from “Block” to “View” causes “View” to
be automatically selected also for “G”, “PG”, and “PG-
13”.
Example 2:
Changing “R” from “View” to “Block” causes “Block” to
be automatically selected also for “NC-17” and “X”.
Blocking Not Rated (NR) TV programs
Use the following procedure to block movies not rated
by the MPAA.
1 Press HOME MENU.
2 Press / to select “Setup”, and then press
ENTER.
3 Press / to select “Parental Control”, and then
press ENTER.
• If you have set a password (page 95), the
password entry screen appears. Enter your 4-
digit password using buttons 0 – 9.
4 Press / to select “MPAA NR”, and then press
ENTER.
5 Press / to select “View” or “Block”, and then
press ENTER.
• The factory default is “View”.
6 Press HOME MENU to exit the menu.
PDP5040HD-Eng (81-96) 7/24/03, 2:01 PM 91