Pioneer PureVision PDP 5040HD - Manual (Page 60)

10 Electronic Program Guide (EPG) (for DTV Only)
60
En
Recording TV programs using a D-VHS
recorder
Use the following procedure to preset TV programs for
recording with a connected D-VHS recorder.
1 Press DTV GUIDE.
• The EPG screen appears.
2 Press / and / to select a program to be
preset, and then press ENTER.
• Select a program not yet started.
• A setup menu appears.
3 Press / to select “Program Rec”, and then
press ENTER.
• A dialog box for mode selection appears.
4 Press / to select “i.LINK”, and then press
ENTER.
• A dialog box for model selection appears.
5 Press / to select the D-VHS recorder model,
and then press ENTER.
• A dialog box for confirmation appears.
6 Press / to select “OK”, and then press ENTER.
• The program is preset and the schedule table is
restored.
• A red square icon appears for the preset
program.
• A black icon appears for overlapped
presetttings.
7 Press DTV GUIDE to exit the Program Guide.
• Recording is not executed if recordable D-VHS tape is
not present in the D-VHS recorder when the preset
program starts. This is also true when a D-VHS
recorder specified for recording with a timer is not in
connection.
• Finish presetting operations two minutes before the
start of the program; otherwise presettings may fail.
• For priorities about overlapped presettings, see
“Priority rules for overlapped presettings” on page 63.
• If you switch off the system using the POWER
button, the program presetting will become
ineffective. Be careful not to switch off the power.
PDP5040HD-Eng (56-64) 7/24/03, 2:00 PM 60