NEC Dterm PSIII - Manual (Page 26)

20
To Disable Incoming Call Vibration Notifica-
tion:
♦ Press the FNC key →3→1→2. PSIII displays:
♦ Select [2] Off, then press the FNC key or 2.
S ERVICE A LARM
Enables you to know when you are in an area without
service, or if the battery is running low.
To Turn On Service Alarm:
♦ Press the FNC key →3→1→3. PSIII displays:
♦ Select [1] On, then press the FNC key or 1 to turn
on Service Alarm for Mode 2* systems.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
To Turn Off Service Alarm:
♦ Press the FNC key →3→1→3. PSIII displays:
♦ Select [2] Off, then press the FNC key or 1 to turn
off Service Alarm for Mode 2* systems.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
Vibration
[1]On
[2]Off
[1]On
[2]Off
Service ALM
[1]On
[2]Off
Service ALM