NEC Dterm PSIII - Manual (Page 28)

22
K EY C LICK
Enables you to hear a beep as you press each key.
To Turn On Key Click:
♦ Press the FNC key →3→1→5. PSIII displays:
♦ Select [1] On, then press the FNC key or 1 to turn
on key click for Mode 2* systems.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
To Turn Off Key Click:
♦ Press the FNC key →3→1→5. PSIII displays:
♦ Select [2] Off, then press the FNC key or 2 to turn
off key click for Mode 2* systems.
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
* Mode 2 features are only available on NEAX 2000 IVS Series 1900 software
or NEAX 2400 IMX Series 7300 software & Zone Transceiver Version 5.00
software or later.
Key Click
[1]On
[2]Off
Key Click
[1]On
[2]Off