NEC Dterm PSIII - Manual (Page 33)

27
♦ Key in current password.
♦ Press the FNC key to enter. PSIII displays:
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
To Turn Off Protect TMM:
♦ Press the FNC key →3→3→3. PSIII displays:
♦ Select [2] Off, then press the FNC key or 2. PSIII
displays:
♦ Key in current password.
♦ Press the FNC key to enter. PSIII displays:
♦ Setting tone will ring.
♦ After two seconds, return to the standby state.
TM R EMINDER
NOTE: This function depends on the OAI
application.
When unread TM exists, warning will be sent every
time you return to the standby state. PSIII displays:
Password?
Protect TMM
Set
[1]On
[2]Off
Protect TMM
Password?
Protect TMM
Reset
Received new TM