NEC Projector VT560 - Manual (Page 12)

12 of 15 Replacing an NEC VT560 Projector (03-00060) in a 2000i-DVX 99-00590-00 Rev A0
If the image is wider at the top or at the bottom (a keystoned image), turn to the final adjustment procedure described
on page 13.
1. Crouch behind the projector and look at the projected image through the view port.
2. While carefully observing the bottom edge of the image at the right side, use the supplied 7/16" nut driver to loosen or
tighten the nut that’s located on the right side of the projector plate, as required.
1. Crouch behind the projector and look at the projected image through the view port.
To adjust image roll
To adjust the image laterally (side-to-side)