NEC GT6000 - Manual (Page 37)

3-7
m Turning off the Projector
To turn off the projector:
First press the POWER (ON/STAND BY) button on the projector cabinet
or the POWER OFF button on the remote control for a minimum of two
seconds. The POWER indicator will glow orange. After the projector turns
off, the cooling fans keep operating for 90 seconds (2 minutes in the op-
tional extended life lamp GT60LPS) (Cooling-off time).
Second, turn off the Main Power switch. The power indicator will go out.
Last unplug the power cable.
NOTE: You cannot turn off the projector for 1 minute immediately after turning on
the projector.
CAUTION
Do not unplug the power cable from the wall outlet or do not turn off
the main power under any one of the following circumstances. Doing
so can cause damage to the projector:
• While the Hour Glass icon appears.
• While the message "Please wait a moment." appears. This mes-
sage will be displayed after the projector is turned off.
• While the cooling fans are running. (The cooling fans continue to
work for 90 seconds (2 minutes in the optional extended life lamp
GT60LPS) after the projector is turned off).
• While accessing a PC card or LAN card. (The PC Card Access in-
dicator lights.)
3. Projecting an Image
OFF
+ -
ON
POWER
MENU
ENTER
ADDRESS
BS
POWER POWER POWER
ON/STAND BY
Power on Fan working Standby or Idle
Steady green
light Flashing orange
light Steady orange
light