NEC GT6000 - Manual (Page 88)

8-25
To delete PC card data you registered.
1. Use the SELECT ̆̄ button to select "Delete" and use the SELECT ̇
button to select the list window.
2. Use the SELECT ̆̄ button to select the PC card data you wish to
delete.
3. Press the SELECT ̈ button to select "Delete" and press the ENTER
button.
The PC card data will be deleted.
If you've lost your registered PC card, proceed as follows:
NOTE: NEC or your dealer will provide you with your Release Code in exchange for
your registered keyword and Request Code. See URLs at the end of this section.
1. Press and hold the POWER button for a minimum of two seconds.
The projector will be turned on and display a message to the effect that
the projector is security-protected.
2. Select [Projector Options] → [Security] from the menu and press hte
ENTER button.
The Release Code input screen will be displayed as well as your Re-
quest Code (24 alphanumeric characters).
3. Enter your Release Code in the Release Code Input screen.
* If the projector is turned on by entering the Release Code, your Secu-
rity will be disabled.
NOTE:
* Some types of PC cards cannot be registered as your protect key.
* It is recommended that you register two or more PC cards in case you lose or
damage your registered PC card.
* Formatting your registered PC card will disable your protect key function.
NOTE:
For additional information visit:
US : http://www.necvisualsystems.com
Europe : http://www.nec-europe.com/
Global : http://www.nec-pj.com/
8. Using On-Screen Menu
Tools
Provides tools for setting On/Off timer, sleep timer, capturing im-
ages, displaying files or changing your background logo in a PC
Card and drawing.
Timer
Enables you to turn on or off your projector automatically at a
specified time. Two timer functions are available: On/Off Timer
and Sleep Timer.
NOTE: The projector has a built-in clock. The clock will keep working for about
three days after the main power is turned off. If the main power is not supplied to
the projector for three days or more, the built-in clock stops working.
On/Off Timer
Up to 10 settings can be programmed.
• Before setting On/Off Timer, make sure that Date, Time Preset feature
is set.
• Even after setting On/Off Timer, turning the projector on or off with the
remote control is possible.
Setting the On or Off Timer
1. Open the On/Off Timer window.
2. Select a program number (No. 1 to 10) by using the SELECT ̆ or ̄
button.