Projector information, Test pattern, 28 8. using on-screen menu – NEC GT6000 User Manual
Page 91
8-28
8. Using On-Screen Menu
Type
Standard lamp
Extended life lamp
Normal
2000H
Eco
3000H
Model
GT60LP
GT60LPS
4500H
Lamp life (H)
Page 2
Signal Type, Video Type, Sync Type, Interlace, Direct Key
Projector Information
Displays the information for your projector such as lamp usage,
filter usage, version number and others. This dialog box has three
pages.
Page 1
Remaining Lamp 1 Time, Remaining Lamp 2 Time, Lamp 1 Hour
Meter, Lamp 2 Hour Meter
NOTE: The progress indicator shows the percentage of remaining bulb life.
The value informs you of the amount of lamp 1 and 2 respectively.
• When the remaining lamp time reaches 0, the Remaining Lamp Time bar indica-
tor changes from 0% to 100 hours and starts counting down. If the remaining
lamp time reaches 0 hour, the projector will not turn on.
NOTE: The Standard lamp life is typically 2000 hours in Normal mode (3000 hours
in Eco mode).
The lamp life, however, may be decreased under certain conditions and the lamp
could reach end of life within the specified time.
Page 2
Filter Usage, Projector Usage, Projector ID
Page 3
Version (BIOS/Firmware/Data/FPGA)
Test Pattern
Press to display the test pattern. Pressing this button sequen-
tially selects 10 test patterns for each red, green and blue.