NETGEAR ADSL2+ Modem Router DM111PSPv2 - Manual (Page 20)

ADSL2+ Modem Router DM111PSPv2 User Manual
1-6 Configuring Your Internet Connection
v1.0, December 2008
3. To save your settings, click Apply.
4. Click Test to verify your Internet connection. If you have trouble connecting to the Internet,
see Chapter 6, “Troubleshooting .
Using Quick Setup to Configure the Modem Router
You can bypass the Setup Wizard and use the Quick Setup screens to manually configure your
modem router.
To manually configure the modem router settings:
1. Select Setup Wizard from the main menu. The following screen displays (see next page).
Fixed IP (Static) Account
Setup
1. If required, enter the account name and domain name from your
ISP.
2. Select Use Static IP Address or Use IP Over ATM (IPoA —
RFC1483 Routed) according to the information from your ISP. If you
select IPoA, the modem router will detect the gateway IP address,
but you still need to provide the modem router IP address.
3. Enter your assigned IP address, subnet mask, and the IP address of
your ISP’s gateway modem router. This information should have
been provided to you by your ISP.
4. Enter the IP address of your ISP’s primary DNS server. If a
secondary DNS server address is available, enter it also.
DNS servers are required to perform the function of translating an
Internet name such as
www.netgear.com to a numeric IP address. For a
fixed IP address configuration, you must obtain DNS server addresses
from your ISP and enter them manually here.
Figure 1-4
Table 1-1. Auto-Detected Internet Connection Types (continued)
Connection Type ISP Information