NETGEAR ADSL2+ Modem Router DM111PSPv2 - Manual (Page 88)

ADSL2+ Modem Router DM111PSPv2 User Manual
Index-4
v1.0, December 2008
S
Secure Socket Layer (SSL) 5-14
Session Initiation Protocol (SIP)/Application Level
Gateway (SIP ALG) 4-9
setting time 4-8
settings, default. See default factory settings 2-3
Setup Manual 1-2 , 1-4
Setup Wizard 1-4, 1-5
specifications
environmental A-1
interface A-2
physical A-1
power adapter A-1
technical A-1
static IP address 1-4, 1-6, 6-6
static routes 4-5
status
ADSL line 2-8
ADSL port 2-6
DHCP 2-6
DNS 2-6
LAN port 2-6
router 2-5
VPI and VCI 2-7
subnet mask
ADSL port 2-6
LAN port 2-6
system log 2-9
system up time 2-6
T
TCP/IP
configuration 1-4, 4-4
troubleshooting 6-7
Technical Report 069 (TR 069), using for remote access
5-12
technical specifications A-1
Telnet, using for remote access 2-13
time and date, troubleshooting 6-8
time servers and time zones 4-8
trademarks ii
traffic rules
adding for IP QoS 5-11
inbound IP filtering 3-5
outbound IP filtering 3-4
port forwarding (inbound rules) 3-6
port triggering (outbound rules) 3-8
Trivial File Transfer Protocol (TFTP), using for remote
access 2-13
troubleshooting
ADSL LED 6-2, 6-3
basic functioning 6-2
configuration changes 6-6
date and time 6-8
Ethernet LED 6-2, 6-4
Internet browsing 6-7
Internet connection 6-6
Internet LED 6-2, 6-4
LEDs, general information 6-2
logging in to the modem router 6-4
Power LED 6-2
Trusted CA certificates 5-14
typographical conventions (for this manual) xii
U
Universal Plug and Play (UPnP) 3-11
up time, system 2-6
upgrading firmware 2-3
URL, accessing the modem router 1-2
V
viewing
attached devices 2-7
logs 2-10
router status 2-5
Voice over IP (VoIP) connection 4-9
VPI and VCI
settings 1-7
status 2-7
W
WAN IP settings 5-5
WAN settings 3-4, 3-6, 5-2