NETGEAR ADSL2+ Modem Router DM111PSPv2 User Manual
Page 69
ADSL2+ Modem Router DM111PSPv2 User Manual
Advanced WAN Configuration
5-11
v1.0, December 2008
2. To add new IP QoS traffic rule, click Add. The following screen displays:
3. Enter the settings for each field as described in
.
4. Click Apply to save your settings and to add the traffic rule to the IP QoS table. To delete a
traffic rule f rom the IP QoS table, select the check box to the right of the traffic rule, then click
Delete.
Figure 5-10
Table 5-6. IP QoS Traffic Rule Settings
Settings
Description
Traffic Class Name
Enter a name for the traffic rule.
Traffic
Conditions
LAN Ports
Select one check box:
• Ethernet. Traffic arrives through the Ethernet port.
• USB. Traffic arrives through the USB port (for models with a
USB port).
Source MAC Address and
MAC Mask
Enter the source MAC address and, if applicable, the MAC mask
address of the traffic source.