Mw1122 administrator manual – Nokia MW1122 User Manual
Page 109
MW1122 Administrator Manual
E
Copyright Nokia Networks Oy
C33902001SE_00
5-74
Command
Stop PPP negotiation when authentication failure
occurs
Description
When enabled, the athentication failure causes the
PPP negotiation to stop. The command
reset ppp
vccx
is required to restart the PPP negotiation.
Syntax
[no] ppp autostop
Arguments
no
disables PPP autostop.
Example
MW1122(conf-vccx)#ppp autostop
MW1122(conf-vccx)#
Command
Switch on/off IP function on ATM channel
Description
Switches on/off IP function on the ATM channel.
Syntax
[no] ip address <ip-address> <ip-mask>
Arguments
no
switches IP function off.
ip-address
is the IP address you want to assign to
the ATM channel. IP address 0.0.0.0 with subnet mask
0.0.0.0 can be used with ppp-vc encapsulation if the
dynamic IP address negotiation is required.
ip-mask
is the subnet mask.
Example
MW1122(conf-vccx)#ip address 192.168.132.13
255.255.255.0
MW1122(conf-vccx)#
Command
Switch on/off RIP send function on ATM channel
Description
Switches on/off RIP send function. When enabled,
MW1122 sends Routing Information Protocol messages
to other routers.
Syntax
[no] ip rip-send {rip-send-mode}
Arguments
no
switches rip-send function off.
v1
send-mode selects RIP version 1.
v2
send-mode selects RIP version 2.
compatible-v1
send-mode selects the sending of
RIPv2 packets using broadcast.
Example
MW1122(conf-vccx)#ip rip-send v1
MW1122(conf-vccx)#