Nokia MW1122 - Manual (Page 70)

Managing MW1122
E Copyright Nokia Networks Oy C33902001SE_00 5-35
Command Show DSL line status
Description Displays DSL line status
Syntax show dsl [all]
Arguments all
Example
MW1122> show dsl
hardware-type ALCATEL/DMT
hardware-rev 99111601/POTS/CP
firmware-rev 00002508
activity-statusOPER/FULL
near-end far-end
maximum-bitrate5696kbits 448kbits
actual-bitrate4608kbits 416kbits
noise-margin 3.5dB 0.0dB
output-power 12.0dBm 20dBm
attenuation 48.5dB 0.0dB
corr-fast-fec 0 0
corr-intl-fec 47 0
fail-fast-crc 0 0
fail-intl-crc 0 0
fail-fast-hec 0 0
fail-intl-hec 0 658
flaged-alarms NONE NONE
MW1122>
Command Show Ethernet interface status
Description Displays Ethernet interface status
Syntax show eth [all]
Arguments show eth command shows Ethernet interface state
and status.
all argument shows also interrupts.
Example
MW1122> show eth
##eth(up)
type
IEEE 802.3/DIX
pkt oct dis err
stat-tx-payload 10964 672919 0 0
stat-rx-payload 10968 657690 0 0
MW1122>