Nokia MW1122 - Manual (Page 39)

MW1122 Administrator Manual
E Copyright Nokia Networks Oy C33902001SE_00 5-4
ip address 10.98.16.1 255.255.255.0
vcc2
pvc 0 102 tunneled-ppp-vc
vcc3
pvc 0 103 eth-llc
bridging
vbridge
ip address 192.168.1.1 255.255.255.0
MW1122>
5.1.4 Bridging only
When only bridging is required, all ATM VCCs are configured as
bridge. VBRIDGE IP address can be used as an optional management
interface.
MW1122> show config running
eth
bridging
wlan
network-name nokia
radio-channel europe 13
bridging
vcc1
pvc 0 101 eth-llc
bridging
vcc2
pvc 0 102 eth-llc
bridging
vbridge
ip address 192.168.1.1 255.255.255.0
MW1122>
5.1.5 Routing/tunneling IP only using slaved WLAN
In all of the above examples slaved WLAN interface can be used
instead of a dedicated configuration. When WLAN is slaved to LAN
interface, all traffic will be bridged between the LAN and WLAN
interfaces and treated like the traffic is received from LAN interface
only. Similarly, all traffic from ADSL/ATM channels will be directed
to the logical LAN interface where it will be internally bridged and
directed to the physical LAN and/or WLAN interface.