NEC XL-3500 - Manual (Page 21)

21
2.INSTALLATION
When Used with One Switcher (ISS-6020/ISS-6020G)
Up to 10 input signals can be accepted when the projector is connected to one Switcher. Using the projector with the Switcher
allows easy adjustment and signal selection.
• Make sure that the SW1 LEVEL mode is selected from the CONNECT CONDITION menu. See page 71 for the information in
detail.
• For more information on the Switcher, refer to the user’s manual accompanying the ISS-6020/ISS-6020G Switcher.
• All cables mentioned above are optional.
The Switcher ISS-6020/ISS-6020G
Personal computer
VCR
From R, G, B, H/V on separate H and
V. on the RGB OUTPUT module
To REMOTE1
To SYSTEM CONTROL
REMOTE 1
Optional control cable 15p-15p
(CTL-6010)
5BNC-5BNC coaxial cable
(separate sync)
(recommended)
To INPUT A (RGB,H/V,V inputs)
3BNC-3BNC cable(sync on green)
4BNC-4BNC cable(composite)
○
○
○○○○○○
VIDEO BNC RCA VIDEO S-VIDEO R/Cr G/Y B/Cb H/HV V OSD OUT
IN OUT
INDICATOR
REMOTE2
IN OUT OPTION REMOTE1
○○○
○