NEC XL-3500 - Manual (Page 29)

29
3.OPERATION
You have two options to store projector settings in the memory: auto-
matically and manually.
* The Automatic Save Feature mode has been set to "DISABLE" by
factory. For information on setting, see "Automatic Auto Data Store"
on page 64.
■ When the Automatic Save Feature mode is set to "ENABLE", pro-
jector settings will be stored in the projector' s memory automati-
cally.
Settings are stored automatically when any one of the following
procedures is performed:
• One input is switched to another.
• The projector is turned off.
• After every 10 minutes of elapsed time.
■ When the Automatic Save Feature mode is set to "DISABLE", pro-
jector settings can be stored in the projector' s memory manually.
When you try to return the source screen by pressing END several
times, the "STORE?" menu is displayed.
To manually save settings, proceed as follows:
1. Use the END button to display the "STORE" menu from the cur-
rent adjustment screen or menu.
2. Use the CURSOR or button to highlight "Yes" or "No" and
press ENTER.
Items to select
• Yes ---- Overwrites the currently projected signal and saves
the settings. Note that "Yes" is available only for
registered signals.
• No ----- Does not save settings.
Storing Projector Settings (Automatic Save Feature)
S t o r e ?
N o Y e s