NEC XL-3500 - Manual (Page 44)

44
3.OPERATION
Items to select
• New Entry ----- Registers a new signal.
• Registry Edit. - Changes setting various parameters of the
registered signals.
3 Use the CURSOR or button to highlight the “1.New
Registry” line and press ENTER.
• The “1. Slot” menu is displayed. Then proceed as follows:
1. Select slot.
2. Select signal system.
3. Set HDTV or not when selecting component signal.
4. Input a user name.
5. Select a location number for your registry.
To advance the next item, select Next and press ENTER. To
return the previous item, select Prev and press ENTER. To
cancel your registry, select Cancel.
1) To Select a Slot
You have two steps depending on whether you use your
projector on standalone or with the ISS-6020 switcher(s).
NOTE: The setting INPUT TERMINAL cannot be done to the
current projected signal.
When using the projector in stand alone application:
Use the CURSOR or button to select one of the three
slots, and press ENTER.
Items to select
• INPUT A ---- Standard
• INPUT B ---- Optional board
• INPUT C ---- Optional board
When using with a single Switcher ISS-6020/ISS-6020G:
Use the CURSOR or button to select the input slot
number of the Switcher and press ENTER.
• Input slot numbers are from 1 through 10.
• The “4. User Name” screen will be displayed when you finish
entering the slot number.
S o u r c e R e g i s t r y
1 . S l o t
2 . S i g n a l
3 . H D T V
4 . U s e r N a m e
5 . N o . S e l e c t S l o t
< P r e v N e x t > C a n c e l
1 . S l o t
I N P U T A
I N P U T B
I N P U T C
S o u r c e R e g i s t r y
1 . S l o t
2 . S i g n a l
3 . H D T V
4 . U s e r N a m e
5 . N o . S e l e c t S l o t
< P r e v N e x t > C a n c e l
1 . S l o t
M a s t e r
[ S l o t 1 ] S l a v e
[ S l o t 1 ]