NEC SILENTWRIT 1700 Series - Manual (Page 108)

5–20 1765 Network Printer Configuration Guide
NetWare Queue Configuration Dialog Box
Display the NetWare Queue Configuration dialog box
by selecting the Queues button in the NetWare
Configuration dialog box. Use this dialog box to add
and remove print queues assigned to the print server
named in the NetWare Configuration dialog box. You
must have supervisor authority to make these changes.
You can enter the following information.
File Server Name: Selects the file server you are
logging into on the network. To login to a file server
select the file server from the File Server Name text
box and click the Login button. If you have already
logged into the file server, the Login button will be
dimmed.
Queue Name: Allows you to select a previously
defined queue or enter a new queue name.
Priority: Sets the priority for remote printer mode
queues. Priorities range from 1 to 10. The default
is 1 (highest priority).
Configured Queues: Displays the queues assigned to
the print server.
Adding a Queue Assignment
1. Select the queue from the Queue Name text box. To
add a new queue, type the new name in the Queue
Name
text box.
2. Click the Add button in the NetWare Queue
Configuration dialog box.
Removing a Queue Assignment
1. Select the queue from the list of Configured Queues.
2. Click the Remove button in the NetWare Queue
Configuration dialog box.
note: Use PCONSOLE to delete queues
permanently.
Saves changes and closes dialog box
Adds a queue
Displays Login dialog box
Removes the selected queue