NEC SILENTWRIT 1700 Series - Manual (Page 16)

1–4 1765 Network Printer Configuration Guide
Software Requirements
Table 1-2 shows the operating systems and network
software you will need to configure the
Silentwriter 1765.
In addition to your network software, the Silentwriter
1765 comes with software to help administer your
Silentwriter across the network. Table 1-2 shows which
configurations are supported by NEC 1765 software.
Table 1-2: Software Requirements
To use this
network
protocol with this operating system you will need this network software
This NEC 1765 software is
available
IPX/SPX MS-DOS® Client software for NetWare version 3.11,
3.12, or 4.1
MS-DOS and Windows 3.1x Client software for NetWare version 3.12 or
4.1 NEC 1765 Administration and
NEC 1765 Client for NetWare
MS-DOS and
Windows for Workgroups 3.11 Client software for NetWare version 3.12 or
4.1 NEC 1765 Administration and
NEC 1765 Client for NetWare
Windows 95 network software included with Windows 95
system software NEC 1765 Administration and
NEC 1765 Client for NetWare
TCP/IP MS-DOS and Windows 3.1x a third party TCP/IP stack, for example,
Chameleon by NetManage, Inc. (for
Windows 3.1x) or LAN Workplace by
Novell® NEC 1765 Administration and
NEC 1765 Client for TCP/IP
MS-DOS and
Windows for Workgroups version 3.11 network software included with Windows for
Workgroups system software NEC 1765 Administration and
NEC 1765 Client for TCP/IP
Windows 95 network software included with Windows 95
system software NEC 1765 Administration and
NEC 1765 Client for TCP/IP
Windows 95 Printing System
Windows NT version 3.1 or 3.5x
(server or workstations) network software included with Windows NT
system software NEC 1765 Administration and
NEC 1765 Client for TCP/IP
UNIX any System V or
BSD compatible system
DLC Windows NT Windows NT Advanced Server 3.1 or
Windows NT Server 3.5x or
Windows NT Workstation 3.5x