NEC SILENTWRIT 1700 Series - Manual (Page 130)

5–42 1765 Network Printer Configuration Guide
NetWare Configuration Dialog Box
NEC 1765 Administration software allows you to
configure the printer across networks. The NetWare
Configuration dialog box allows you to configure a
Silentwriter on a NetWare network from a TCP/IP-
based network operating system.
The NetWare Configuration dialog box includes the
following information.
MAC Address: Displays the LAN card’s network
address.
Print Server Name: The print server name for the
NetWare environment can be changed. You may use
any combination of upper-case alphanumeric
characters, hyphens (-), and underscores (_) in the
print server name.
File Server Connection
Limited File Server: NetWare network operating
system software allows a single printer to connect to
multiple file servers. You can connect your
Silentwriter to up to 8 file servers. To limit the
printer to only one file server, enter the name of the
file server in the Limited File Server text box.
note: Specifying a file server may improve
performance time as the NEC 1765 Administration
software will no longer scan for file servers. You may
want to specify a limited file server even in single server
networks.
Scan for File Servers: Logs into the file server on a
regular basis when this check box is selected.
Scan Interval: Sets the frequency in seconds with
which the Silentwriter scans to the file server. The
range is 1 to 255 minutes and the default is 5
minutes. If a limited file server has been specified or
Scan for File Servers is turned off, the scan interval
is automatically set to 0 minutes.
Saves changes and closes dialog box
Discards changes and closes dialog box
Opens online help about this dialog box