NEC SILENTWRIT 1700 Series - Manual (Page 40)

3–8 1765 Network Printer Configuration Guide
Installing NEC 1765 Client Software for
NetWare in Windows 3.1x
Follow these steps to install NEC 1765 Client software
for NetWare using the installer program provided on
the NEC 1765 software for NetWare diskette.
1.
Boot your system and start Windows.
2. Insert the NEC 1765 software for NetWare diskette
into the appropriate drive (this example uses drive
a: ).
3. In the Windows Program Manager, select Run from
the File menu. Windows displays the Run dialog
box.
4. Type
a:\setup.exe
in the Command Line field.
5. Click the OK button. This launches the installer
program. The installer starts up, and the Welcome
screen opens. Click the Setup button (A).
6. In the Select Utilities screen, select NEC Printer
Client Access
. Make sure the checkbox in front of
NEC Printer Administration is blank. Click the
Continue
button (B).
7. The Select Destination Path screen defines the
directory for the new software. Click the Continue
button (C).
8. The Installer begins copying the files (D). The
software will be copied into a directory named
c:\NEC1765\NETWARE .
9. When the installation is complete, click the OK
button in the Exit Setup window to close the
installer (E).
10. Restart Windows to complete the software
installation.
11. Run NEC 1765 Client software for NetWare by
opening the Program Manager. The NEC 1765
Client software icon is located in the NEC Printer
Utility - NetWare program group (F).
Installing NEC 1765 Client Software for
NetWare in Windows 95
Follow these steps to install NEC 1765 Client software
for NetWare using the installer program provided on
the NEC 1765 software for NetWare diskette.
1.
Boot your system and start Windows.
2. Insert the NEC 1765 software for NetWare diskette
into the appropriate drive (this example uses drive
a: ).
3. In Windows, select Run from the Start menu.
Windows displays the Run dialog box.
4. Make sure
a:\setup.exe
appears in the Command Line field.
5. Click the OK button. This launches the installer
program. The installer starts up, and the Welcome
screen opens. Click the Setup button (A).
6. In the Select Utilities screen, select NEC Printer
Client Access
. Make sure the checkbox in front of
NEC Printer Administration is blank. Click the
Continue
button (B).
7. The Select Destination Path screen defines the
directory for the new software. Click the Continue
button (C).
8. The Installer begins copying the files (D). The
software will be copied into a directory named
c:\NEC1765\NETWARE .
9. When the installation is complete, click the OK
button in the Exit Setup window to close the
installer (E).
10. Restart Windows to complete the software
installation.
11. Run NEC 1765 Client software for NetWare by
selecting the Programs submenu from the Start
menu. The NEC 1765 Client software icon is located
in the NEC Printer Utility - NetWare program
group (F).