Using the menus – NEC MT 1020G /820G User Manual

Page 23

Advertising
background image

E – 23

Using The Menus

1. Press the "Menu" button on the remote control or projector cabinet to display the Main Menu.

2. Press the "Select" button on the projector cabinet or (▲) (▼) buttons on your remote control to highlight the menu for

the item you want to adjust.

3. Press the "Enter" button on the projector cabinet or the "Left Click" button on the remote control to select a submenu or

item.

4. Adjust the level or turn the selected item on or off by using the "Adjust" (+) or (–) buttons on the remote control or cabinet.

The on-screen gauge will show you the amount of increase or decrease. [The (+) button is "on" and (–) is "off".]

5. The change is stored until you adjust it again.

6. Repeat steps 2-5 to adjust an additional item, or press "Right Click" on your remote control to quit the menu display.

VIDEO

RGB AUTOPICTURE ON

RGB AUTOPICTURE OFF

Advertising