Netopia 2200 - Manual (Page 116)

116
Link: Internal Servers
Your Gateway ships with an embedded Web ser ver and suppor t for a Telnet session, to
allow ease of use for configuration and maintenance. The default por ts of
80 for HTTP and
23 for Telnet may be reassigned. This is necessary if a pinhole is created to support appli-
cations using por t 80 or 23.
See “Pinholes” on page 75. for more information on Pinhole
configuration.
Web (HTTP) Server Port: To reassign the port number used to access the Netopia
embedded Web ser ver, change this value to a value greater than 1024. When you next
access the embedded Netopia Web ser ver, append the IP address with <por t number>,
(e.g. Point your browser to
http://210.219.41.20:8080).
Telnet Server Port: To reassign the port number used to access your Netopia embedded
Telnet ser ver, change this value to a value greater than 1024. When you next access the
Netopia embedded Telnet ser ver, append the IP address with <por t number>, (e.g.
telnet
210.219.41.20 2323).
You can also use the LAN-side address of the Gateway, 192.168.1.x:8100 to access the
web ser ver and 192.168.1.x:2323 to access the telnet ser ver. The value of 0 for an inter-
nal ser ver por t will disable that ser ver. You can disable Telnet or Web, but not both. If you
disabled both por ts, you would not be able to reconfigure the unit without pressing the
reset button.
Link: Software Hosting
Software Hosting allows you to host internet applications when NAT is enabled. User(PC)
specifies the machine on which the selected software is hosted. You can host different
games and software on different PCs.