Netopia 2200 - Manual (Page 42)

42
Home Page - Information
The Home page’s center section contains a summar y of the Gateway’s configuration set-
tings and operational status.
Summary Information
Field Status and/or Description
General Information
Hardware Model number and summar y specification
Serial Number Unique serial number, located on label attached to bottom of unit
Software Version Release and build number of running Netopia Operating System.
Product ID Refers to internal circuit board series; useful in determining which software
upgrade applies to your hardware type.
Date & Time This is the current UTC time; blank if this is not available due to lack of a
network connection.
Breakwater Firewall If the optional feature key is installed: Status of the Breakwater Firewall:
ClearSailing, SilentRunning, or LANdLocked.
Safe Harbour If the optional feature key is installed: SafeHarbour VPN IPsec Tunnel option
(if installed): either On or Off.
WAN
Status Wide Area Network may be Waiting for DSL (or other waiting status), Up or
Down
Data Rate (Kbps) Once connected, displays DSL speed rate, Downstream and Upstream
Local Address IP address assigned to the WAN por t.
Peer Address The IP address of the gateway to which the connection defaults. If doing
DHCP, this info will be acquired. If doing PPP, this info will be negotiated.
Connection Type May be either Instant On or Always On.
NAT On or Off. ON if using Network Address Translation to share the IP address
across many LAN users.
WAN Users Displays the number of users allotted and the total number available for
use.
LAN
IP Address Internal IP address of the Netopia Gateway.
Netmask Defines the IP subnet for the LAN
Default is 255.255.255.0 for a Class C device