NComputing VSPACE L300 - Manual (Page 21)

L300/L230/L130 User Manual
21

"Loaded from . . .": How the access device loaded its latest firmware update.
The "Close" button closes the options menu.
The “Setup” Menu
Within the “Options” screen, the "Setup" button brings up a set of tabs for viewing and changing the access
device settings. Note that this is an optional step to be used for more control of the device.
The "Save" button saves all the changes made in the tabs and closes the window. This brings the user back to
the host PC list.
The "Cancel" button discards all the changes made in the tabs and closes the window. This brings the user
back to the host PC list.
The “Network” Tab
The "Network" tab contains settings for network connectivity.
If you plan to use a static IP configuration, click on the "Use Static IP Address" radio button to set an IP
address and gateway address for the access device to use.
Otherwise, click on the "Get Dynamic IP Address" radio button to configure the access device to use DHCP to
get its IP address. Note, the MAC address is shown here for reference only and cannot be edited.