NComputing VSPACE L300 User Manual
Page 9
L300/L230/L130 User Manual
9
At the software End User License Agreement screen, please read the agreement. When you are
finished, if you agree, click on the "I agree" checkbox, and then click on the "Next" button.
At the software Terms of Use screen, please read the terms of use. When you are finished, if you
agree, click on the "I agree" checkbox, and then click on the "Next" button.
At the “Additional Options” screen, you may choose to install the Network Administrator Console, which
expands vSpace’s control capabilities, so that multiple host PCs may be administered from one
location. If you choose to use an administrator password, enter it and retype it. Click on the "Next"
button.
At the "Choose destination location" screen, you can install to the default location, or you can choose a
different location. When you are finished, click on the "Next" button.
At the final “Confirm Installation” screen, click “Install” to begin the software installation. This process
may take up to 5 minutes to complete, and it is normal for the system to beep frequently. The installer
may appear to freeze or cause a lock-up, but if the mouse cursor regularly switches between the
pointer and the hourglass, everything should be proceeding normally. If the installer takes longer than
15 minutes to complete, please contact NComputing technical support for assistance.
At the "vSpace successfully installed" screen, click
“Close” to end the installer, and select whether or
not to immediately restart the computer (a restart is required before vSpace can be used).
Note:
When dealing with certain firewall applications, you may need to make sure that the
NComputing .exe files have proper access permission to the network. These .exe files include:
KMSERVC.EXE, BOOTSRV.EXE, KMMSG.EXE, KMUPDATE.EXE, KMREGWIZ.EXE
Within the Exceptions tab of the Windows Firewall the ports that should be opened are:
TCP-Protocol: 27605, 27615, 3581, 3597, 3645, 3646, 3725
UDP-Protocol: 1027, 1283, 3581, 3725
Please see our Knowledge Base at
for more details.