NComputing VSPACE L300 User Manual
Page 45
L300/L230/L130 User Manual
45
select a preconfigured group of columns or you can click on the "Advanced" button to select individual columns
to display.
Double-clicking on an entry in the table brings up the "Device Properties" window that shows a list of properties
and buttons for changing the device's settings.
The settings you can change are all the same settings you can change when you use the "Options" window on
the access device itself. See the access device setup section for details on these settings.
Note: There are four settings you can change in the "Device Properties" window that you can't change in the
access device's "Options" window.
One is the device's name. You can configure it on the management console by clicking on the
"Connection Settings" button.