NComputing VSPACE L300 - Manual (Page 8)

L300/L230/L130 User Manual
8
For Microsoft OS licensing information see the paragraph on page 2.
For each L-series device you will need:

Keyboard and mouse (PS/2 for L130/L230 or USB for L300)

Monitor

A category 5/6 network cable to connect to your existing Ethernet network

Optional: speakers, headphones, microphones and USB peripherals
Installation
vSpace software installation

Insert the software installation CD into the host
computer's CD drive. In most cases, a
window will automatically appear after a few
seconds with installation options. If it does not
appear, go to "My Computer," open the CD
drive's icon, and start the "Setup" application.

At the initial setup screen, click the "Download
Latest Software" button. This will launch a
browser window at the NComputing Software
Download Center, Locate the correct software
based on product model and operating system,
and download the corresponding “zip” folder.

(Note the current version of vSpace is always
located at www.ncomputing.com/downloads )
 If internet access is unavailable, click “Browse CD” to locate the installer file per the next step

After downloading and extracting the installer files, or alternately locating them on the product CD, run
the vSpace Installer MSI.
Note: If the MSI file is not present, instead run “setupnc.exe”

At the installer’s "Welcome" screen, click on the "Next" button.

At the antivirus and firewall warning screen, read and follow the instructions, then click on the "Next"
button.