NEC GT1150 - Manual (Page 28)

E – 20
To turn off the projector:
First press the Power (ON/STANDBY) button on the projector cabinet or the POER OFF button on the remote
control for a minimum of two seconds. The power indicator will glow orange. After the projector turns off, the
cooling fans keep operating for ONE minute.
NOTE: Do not disconnect the power cable during this time. Then, unplug the power cable. The power indicator will go out.
Fan running Stand by
Status of indicators: Off
OFF ON
POWER
STATUS POWER STATUS POWER
Flashing green
light Steady orange
light
About Startup Screen
(Menu Language Select screen)
When you first turn on the projector, you will get the Startup screen.
This screen gives you the opportunity to select one of the seven menu languages: English, German,
French, Italian, Spanish,Swedish and Japanese.
To select a menu language, follow these steps:
1. Use the Select
▲ or ▼ button to select one of the seven languages for the menu.
OFF
+ -
PICTURE
ADJUST
ABC DEF GHI
JKL MNO PQR
STU
,. UNDO CANCEL
TEST
PICTURE
KEYSTONE AMPLITUDE ENTRYLIST
SOUND OSD
MUTE
MAGNIFY
HELP INFO.
POSITION AUTO PIXEL
VWX YZ?
WHITE BAL.
IMAGE
ON
POWER
MENU
ENTER
1 2 3
4 5 6
7
0
8 9
ADDRESS
PROJECTOR
R G B
LENS
SHUTTER
BS
+
-
+
-
FOCUS ZOOM
CTL
LENS
+ -
MENU
ENTER
2. Press the Enter button to execute the selection.
+ -
MENU
ENTER
3. The Basic/Custom menu will be displayed in the language you
have selected.
CANCEL
To close the menu, press the Cancel button.
After this has been done, you can proceed to the advanced menu operation.
If you want, you can select the menu language later. See "Language" on page E-45.