NEC GT1150 - Manual (Page 32)

E – 24
Connecting Your DVD Player with Component Output
Use the optional Component V cable to connect your DVD player with the component output to your GT1150
Projector. To make these connections, simply:
1. Turn off the power to your projector and DVD player.
2. Use the optional Component V cable to connect your DVD player to the RGB 1 input or use a D-Sub 15 pin
cable to the RGB 2 input of your GT1150 projector.
3. Turn on the projector and the DVD player.
DVI L/MONO
L/MONO
RGB 2
RGB 1
VIDEO 1
VIDEO 2
S-VIDEO AUDIO OUT
R/Cr G/Y B/Cb
V H/HV
MONITOR OUT
R
L/MONO R L/MONO R
L/MONO R L/MONO R
R
HD VCR
DVD player
Audio equipment