NEC Sever Switch Unit N8191-09 - Manual (Page 28)

CHECK OF ACCESSORIES
The carton of the server switch unit contains several accessories as well as the unit. Make sure that
all items listed below are provided and then inspect them. If one or more items are missing or
defective, contact your service representative.
Tips
The accessories are required for the setup of the server switch unit or the
addition of an optional device. Store them carefully.
Server switch unit (N8191-09) Notice for using N8191-09
Server Switch Unit ×1 User's Guide Cable clamp
Screw A (M5) × 8 Screw B (M3) × 10 Tie wrap × 10
Device ID label
(36 pcs. per sheet)
Rack mount brackets (small)
×
2
Rack mount brackets (large)
×
2
Shock absorbers
× 4 DIP switch setup
label ×1
Tips
These accessories are available only for using in Japan.
Do not use them in any other country than Japan.
Warranty AC Cord for Japan (100 VAC)
- xxii -