NEC Sever Switch Unit N8191-09 - Manual (Page 91)

D) Setting of console information
1. Select and start one of the servers on port 1 through 8.
2. Press the Ctrl + Alt + Shift key or press Scroll Lock key twice to display the OSD screen.
3. Press the N key to enter into the customer mode.
4. If you press the Enter key, the background color of EDIT SET on the screen changes to
purple.
5. Make sure that the background color of EDIT SET returns to blue, and then the [PnP
Monitor] or [Default Monitor] is displayed on the screen.
6. Press the P key to exit the customer mode, and then press Esc key to exit the OSD.
7. Restart the all servers connected to the server switch unit.
- 62 -