Roland RG-3M - Manual (Page 50)

48
Chapter 2. Using the RG-3M with an External Display or Television
Turning the Power Off
After use, turn off the power using the following procedure.
1.
Turn the volume all the way down on the RG-3M.
2.
Turn off the RG-3M.
3.
Turn off the connected display.
■ Changing the Display Settings
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [ ] (Select +) button to
display the EXT DISPLAY screen.
fig.02-020d
3.
Press the [Song] (Select -) button or [ ] (Select +) button so that
the display setting is flashing.
fig.02-030d
4.
Press the [ ] (Value -) button or [ ] (Value +) button to
select “VGA.”
5.
Press the [Function] (Exit) button so the indicator goes out.
Images are now displayed in the screen of the connected external display.
When you press the [DISPLAY] button on the remote control, the content
being displayed switches to the external display.
Song Select screen → Lyrics screen → Slide show → Notation → Song Select
screen...
You can save this setting in
the RG-3M’s memory using
the Memory Backup
function (p. 75).
To change the settings
indicated in the display, refer
to “Selecting What is To Be
Displayed on the External
Display or Television” (p. 50)
.
RG-3M_e3.book 48 ページ ２００８年３月２５日 火曜日 午前１０時１分