Roland RG-3M - Manual (Page 93)

91
Chapter 6. Changing Various Settings
Preventing Changes to the
Current Settings (Panel Lock)
When “Panel Lock” is activated, all buttons will no longer
function.
Thus, even if you press a button by mistake, the settings
remain unchanged.
Making the Setting
1. Set the desired tones and other settings.
2. Hold down the [Function] (Exit) button and press
the [Moving Key] (Enter) button.
This activates Panel Lock.
* Pressing buttons during playback or recording of a song stops
the playback or recording.
You can perform by playing the keys.
You can adjust the volume with the [Volume] knob and
adjust the tone of the sounds with the [Brilliance] knob.
The following screen appears when Panel Lock is in
force.
fig.06-001d
Cancelling the Setting
1. To cancel Panel Lock, hold down the [Function]
(Exit) button again and press the [Moving Key]
(Enter) button.
Changing the Moving Key
Settings
■ Stopping the Keyboard
Movement
Although you can have the keys of the RG-3M’s keyboard
move in correspondence with songs as they are played back,
you can also temporarily stop the movement of the
keyboard.
1. Press the [Moving Key] button so the indicator goes
out.
Now the keyboard will not move in correspondence
with the song being played back.
[Moving Key]
indicator
Keyboard Function
Indicator lit
The keys play along with the
performance.
Indicator off The keys do not move.
You can assign the “Moving Key” function to the remote
control’s [FUNC 1] button or [FUNC 2] button and use
the remote control buttons to switch the Moving Key
function on and off (p. 35).
RG-3M_e3.book 91 ページ ２００８年３月２５日 火曜日 午前１０時１分