Roland RG-3M - Manual (Page 62)

60
Chapter 3. Performance
■ Producing the Resonance of the Strings When
the Keys Are Played (String Resonance)
When you play the keys on an acoustic piano, the strings that are already
playing resonate as well. The function that reproduces this effect is called
“String Resonance.”
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select +) button to
display the RESONANCE screen.
fig.03-100d
3.
Press the [Song] (Select -) button or [ ] (Select +) button to get
the value for “String” to flash.
fig.03-130d
4.
Press the [ ] (Value -) or [ ] (Value +) button to change the
value.
5.
Press the [Function] (Exit) button so the indicator goes out.
Value Description
0–9
The resonance level decreases as the value is decreased, while
increasing the value increases the amount of resonance.
The String Resonance function is not active when the value is
set to “0.”
You can save this setting in
the RG-3M’s memory using
the Memory Backup function
(p. 75).
NOTE
This setting is enabled only
with the piano tones.
You cannot set this for
other tones.
RG-3M_e3.book 60 ページ ２００８年３月２５日 火曜日 午前１０時１分