Initializing the user memory and usb memory, P. 97), P. 97 – Roland RG-3M User Manual
Page 99
97
Chapter 6. Changing Various Settings
Initializing the User Memory
and USB Memory
You can delete all of the data in the User memory, in USB
memory, and restore (initialize) the data to the original
default factory settings.
The RG-3M contains an internal memory area to which you
can save recorded performances and other data.
This area is called the “User Memory.”
The following content is stored in the User Memory.
• Content registered in the “Favorites” (p. 25)
• Content in saved User Program (favorite performance
* Executing this procedure does not initialize any settings other
than the content of the User Memory. To restore the factory
defaults for settings other than the User Memory content,
carry out Factory Reset (p. 76).
1.
To initialize your USB memory, first connect the
USB memory to the Ext Memory port.
2.
Press the [Function] (Exit) button, getting its
indicator to light.
3.
Press the [Song] (Select -) button or [
] (Select
+) button to display the FILE screen.
4.
Press the [Song] (Select -) button or [
] (Select
+) button so “FORMAT” is flashing.
fig.06-150d
5.
Press the [Moving Key] (Enter) button.
6.
Press the [
] (Value -) button or [
] (Value
+) button to select the memory to be initialized.
fig.06-151d
7.
Press the [Moving Key] (Enter) button.
A confirmation message appears in the screen.
fig.06-160d
If you press the [Function] (Exit) button, none of the data
in User memory or USB memory is erased, and you’re
returned to the original screen.
8.
Press the [Moving Key] (Enter) button once more.
The data in the User memory or USB memory is deleted.
* Be sure not to turn off the power as long as “Executing...” is
displayed. Turning off the power at this time may corrupt the
RG-3M’s internal memory and render it unusable.
9.
Press the [Function] (Exit) button so the indicator
goes out.
Value
Description
User
Memory
Contents of the User Memory
Ext
Memory
Contents of the USB memory connected to
the Ext Memory port
RG-3M_e3.book 97 ページ ２００８年３月２５日 火曜日 午前１０時１分