Roland RG-3M - Manual (Page 82)

80
Chapter 4. Recording the Performance
7.
Press the [Song] (Select -) button or [ ] (Select +) button to get
“save-destination number” to flash.
fig.04-090d
8.
Press the [ ] (Value -) button or [ ] (Value +) button to
select the “save-destination number.”
When a performance has already been saved to a number, the name of the
performance is indicated.
When a number has no performance assigned to it, this is indicated in the
display in the following form: “4: (Empty).”
9.
Press the [Moving Key] (Enter) button.
The performance is saved.
10.
Press the [Function] (Exit) button so the indicator goes out.
■ Deleting Performances Saved to the “Favorites”
or USB Memory
To delete performances saved to the “Favorites” or USB memory, refer to p.
45.
NOTE
When saving performances to
the USB memory, do not
remove the USB memory
from the Ext Memory port
until the save is completed.
When a number has no song assigned to it, this is indicated in the display in the
following form: “4: (Empty).”
fig.04-100d
The following appears in the screen if you attempt to save a song to a number to
which a song has already been saved.
fig.04-110d
To delete the saved song and replace it by saving the current song, press the [Moving
Key] (Enter) button.
If you do not want to delete the saved song, press the [Function] (Exit) button to
cancel saving.
RG-3M_e3.book 80 ページ ２００８年３月２５日 火曜日 午前１０時１分