Roland RG-3M - Manual (Page 63)

61
Chapter 3. Performance
■ Producing the Resonance of the Strings When the
Keys Are Played (Damper Resonance)
You can change the volume of the damper pedal resonance.
On an acoustic piano, depressing the damper pedal makes the notes you
play resonate with other strings, adding rich reverberations and fatness to
the sound. The damper pedal on the RG-3M recreates this resonance
(Damper Resonance) when depressed.
1.
Press the [Function] (Exit) button, getting its indicator to light.
2.
Press the [Song] (Select -) button or [ ] (Select +) button to
display the RESONANCE screen.
fig.03-100d
3.
Press the [Song] (Select -) button or [ ] (Select +) button to get
the value for “Damper” to flash.
fig.03-150d
4.
Press the [ ] (Value -) or [ ] (Value +) button to change the
value.
5.
Press the [Function] (Exit) button so the indicator goes out.
Value Description
0–9
The resonance volume decreases as the value is lowered, while
raising the value increases the volume of the Damper Reso-
nance.
The Damper Resonance function is not active when the value is
set to “0.”
You can save this setting in
the RG-3M’s memory using
the Memory Backup
function (p. 75).
NOTE
This setting is enabled only
with the piano tones.
You cannot set this for
other tones.
RG-3M_e3.book 61 ページ ２００８年３月２５日 火曜日 午前１０時１分