Roland Audio Processor SL-20 - Manual (Page 12)

12
Operating the SL-20
Using the TAP Pedal to Cue the Slice Pattern
You can jump back to the beginning of the current slice pattern by pressing the TAP
pedal while the TAP indicator is off.
* The slice pattern is not played when the effect is switched off.
Setting the Tempo with the TAP Pedal
You can set the tempo for the slice pattern by pressing the TAP pedal in time with the
tempo.
* You cannot set the tempo with the SL-20 while MIDI clock is being received.
1. Press the TAP pedal two or more times at the tempo you want to set.
This sets the tempo. The TEMPO indicator flashes in sync with the tempo.
* The tempo setting is stored in memory.
Lit
Blink
Press two or more times
SL-20_e.book 12 ページ ２００８年３月２８日 金曜日 午前８時２８分