Roland Audio Processor SL-20 - Manual (Page 3)

3
Front Panel
Panel Descriptions
BANK Knob
Turn to switch the
slice pattern variation.
EFFECT LEVEL Knob
Adjusts the volume of
the effect sound. The
volume of the effect
sound increases as the
knob is turned to the
right.
TEMPO Indicator
This flashes in sync with the tempo.
The indicator flashes red on the slice pattern’s first
beat and green on the second, third, and fourth beats.
TEMPO Knob
This sets the tempo. Turn the knob to the
right to increase the tempo, and to the left
to slow the tempo down.
You can adjust the tempo more precisely
by turning the knob slowly.
* You cannot set the tempo with the SL-20
while MIDI clock is being received.
DUTY Knob
Adjusts the duration of the slice pattern
sound. The sound is played longer the
further the knob is turned to the right.
OUTPUT MODE Button
This switches the output mode.
* You can select the output mode only when connected for stereo output. MONO is selected when the
SL-20 is connected in monaural.
OUTPUT MODE List
OUTPUT MODE Function
MONO The same signal is output from both the OUTPUT R/MONO jack and the L jack.
STEREO FIXED Output with fixed left and right positions.
RANDOM The output randomly alternates between left, right, and center.
PING-PONG The output bounces between the left and right channels.
AUTO The location of the sound shifts smoothly between the left and right channels.
(3D Cross) The location of the sound moves forward and back as well as left and right.
(3D Panner) This produces a swirling, three-dimensional type of sound.
ATTACK Knob
Adjusts the volume of the slice pattern’s attack.
The volume of the attack is boosted as the knob is turned to the right.
DIRECT LEVEL Knob
Adjusts the volume of
the direct sound when
the effect is on. The
volume of the direct
sound increases as the
knob is turned to the
right.
PATTERN Knob
Turn to switch the
slice pattern.
* The slice pattern is
composed of one
measure.
PEDAL MODE Button
This selects the behavior of the START/
STOP pedal when it’s pressed.
LATCH: Pressing the START/STOP
pedal toggles the effect on/off.
* When switching effects off, the effect
switches off at the time the pedal is released.
MOMENTARY: The effect is switched on only as
long as the START/STOP pedal
is held down. Releasing the
pedal switches off the effect.
SL-20_e.book 3 ページ ２００８年３月２８日 金曜日 午前８時２８分