Ringdale Minit 5250E - Manual (Page 15)

Copyright  2006 Ringdale User Manual, 62-400310001 Page 15
Configuring 5250 Display Sessions
Name of the Session - Enter the name of the Session. The name of the session needs to be
unique. The AS/400 will not let two sessions have the same name. The name must start with
letters and have a maximum of 10 characters. This name will show up on the AS/400.
Autostart at Boot – If you want this session to start automatically each time you boot, select
this.
Run in TEXT mode – In this mode the emulation screen closes out the X-Windows. More on
this under the section: Text Terminal Mode.
IP Address of Host - Enter the IP address of the AS/400.
Port at Host – This is the port used for telnet on the AS/400. Usually 23.
Terminal Type – This is usually left at the default IBM-3477-FC, however you can configure
your device type to be any of the following:
IBM-3477-FC 27x132 Color (Default) IBM-3477-FG 27x132 Monochrome
IBM-3179-2
24x80 Color IBM-3180-2 27x132 Monochrome
IBM-5292-2 24x80 Color IBM-3196-A1 24x80 Monochrome
IBM-5291-1 24x80 Monochrome IBM-5291-11 24x80 Monochrome