Ringdale Minit 5250E - Manual (Page 28)

Copyright  2006 Ringdale User Manual, 62-400310001 Page 28
Print Queue / Session Status
You can start the printer session as soon as it is created using the Restart Session
button in the Define Printer Session.
To see if the printer session is running, click the Start button and select Print Queue /
Session Status.
If the printer started successfully, it will show status IS RUNNING. The printer session can
start even if you do not have a printer attached.
If the printer could not start, it will show status IS NOT RUNNING. This will indicate a problem
with the 5250 Printer Session configuration.
Check the name to make certain it legal. The name must start with letters, and
not exceed ten characters.
Check that the I-Series Printer entry is supported on the AS/400. For example
older AS/400 do not support the HP5SI selection.
Check the IP Address entry. This must be the IP Address of the AS/400.