Ringdale Minit 5250E - Manual (Page 20)

Copyright  2006 Ringdale User Manual, 62-400310001 Page 20
Select Network, Parallel Port, or Serial Port.
For a printer that is locally attached to this MinIT unit select Parallel Port or Serial Port.
IP Address or Port
For a Network printer, enter it’s IP address.
For a parallel printer use 0.
For a serial printer, use 1 and enter the appropriate parameters in the Baud Rate, Parity, Data
Bits, Stop Bits, and Flow Control fields.
NOTE: To bypass the spooler and print directly to the printer enter LP0.
Printer Name (optional) - Some Network Print Servers require a Printer Name. Consult
with your Network Administrator.
Click the Done button to exit this window and configure another.
Click the Cancel button to cancel your changes.
Click the ? Help button for more information.