Roland SJ-645EX - Manual (Page 111)

109 Chapter 8: Specifications
8-2 Printing Area
The media's printable width (the direction of print-head carriage movement) is determined by the width of the loaded
media. When the [SETUP] key is pressed after loading the media, the width of the media is detected and the printing area
appears on the display. The printing area is normally 10 mm (3/8 in.) inward from the respective left- and right-hand
edges of the media.
When the printable width have been specified with the [PRINT AREA] menu, the margins are in accordance with these
setting values.
Printing width
Length of media
96.5 mm
10 mm
90 mm
Media
Printing area
Origin point (0,0)
10 mm
You can use the [PRINT AREA] menu to specify
the width of the printing area.